Just adding ECO's 10, 11, 12 and 13 to make them publicly available
KP
NAMURU V2 R3 ECO 10, 11, 12 & 13
2 posts • Page 1 of 1
NAMURU V2 R3 ECO 10, 11, 12 & 13
by possum on Mon Apr 28, 2008 9:07 pm
- Attachments
-
GPS410_V2_R3_ECO_13.pdf- Connects the RTC to the FPGA
- (39.32 KiB) Downloaded 233 times
-
- GPS410_V2_R3_ECO_12.pdf
- Starts up the USB controller
- (39.38 KiB) Downloaded 219 times
-
- GPS410_V2_R3_ECO_11.pdf
- Improves the rise time of the sample clock
- (39.58 KiB) Downloaded 215 times
-
- GPS410_V2_R3_ECO_10.pdf
- Apply this ECO if you don't get any satellites
- (39.22 KiB) Downloaded 220 times
-
possum - Designer
- Posts: 35
- Joined: Wed Apr 16, 2008 9:33 pm
Re: NAMURU V2 R3 ECO 10, 11, 12 & 13
by possum on Tue Mar 24, 2009 8:20 pm
Just an additional note to users who have a R4 board:
There is an error regarding SHEET 6 in the download of the R4 schematic. For some reason the R3 sheet was included which doesn't show the correct connections for the new sensors. This has now been corrected and the right sheet 6 is now included in the download.
Just for convenience the R4 SHEET 6 is included here.
K.
There is an error regarding SHEET 6 in the download of the R4 schematic. For some reason the R3 sheet was included which doesn't show the correct connections for the new sensors. This has now been corrected and the right sheet 6 is now included in the download.
Just for convenience the R4 SHEET 6 is included here.
K.
- Attachments
-
- 410_2CH_R4 SHEET6.pdf
- (120.29 KiB) Downloaded 206 times
-
possum - Designer
- Posts: 35
- Joined: Wed Apr 16, 2008 9:33 pm
2 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest